Chunky Charcoal Plant Hanger

Chunky Charcoal Plant Hanger is a 90 cm macramé plant hanger for a 14 cm pot: 8 cords of cotton 3-ply rope, 6 mm cut at 4.7 m, 4 knotted arms and a 3-row net.

Math-verified, not yet hand-tested

What was checked: cord lengths from the knot multipliers, the net spacing against the pot, the hanging length against the target.

Finished length: 89.5 cm from ring to tassel end
Pot: 14 cm across, 13 cm tall
Cord: Cotton 3-ply rope, 6 mm
Cords: 8 working cords, 16 strands
Ring: Metal ring, 7.5 cm (3 in)
Total cord: about 39 m (858 g)

Save

The first rows are free to read below. Every library pattern and its PDF are included with any plan.

Buy the supplies2 items

Cotton 3-ply rope, 6 mm
39.0 m
Amazon
Metal ring, 7.5 cm
3 in
Amazon

Retailer links may earn Crafters a small commission. Prices are the retailer's.

Cut list

Piece	Count	Length
Working cord	8	470 cm (4.7 m)
Wrapping cord (top wrap)	1	70 cm

Each working cord is folded in half through the ring, so 8 cords give 16 strands and 4 arms of 4 strands. Cut lengths use 4x the finished length for square knots, 3.5x for the spiral, 1x for gaps and the tassel, plus 5 cm per wrap and 10 cm for the fold and trim, rounded up to 10 cm.

1. Mount on the ring

Fold the 8 working cords in half and hang the folds over the ring so 16 strands hang down evenly. Hang the ring on a hook at eye level; the rest is easier with the work hanging.

2. Top wrap

3 cm

With the 70 cm wrapping cord, tie a gathering knot around all 16 strands directly under the ring: lay the cord along the bundle with a loop at the bottom, wind about 5 turns down over it, pass the end through the loop and pull the top tail until the loop disappears inside the wrap. Trim both tails.

The full pattern, with its cutting plan and every step, is included with a plan

Every library pattern and its PDF are included with any plan. The first rows, the supplies and the notes are free to read.

Get a plan

Category	Item	Amount
cord	Cotton 3-ply rope, 6 mm	39.0 m
rings	Metal ring, 7.5 cm	3 in

Inputs

Sizes are computed from these fixed inputs: target length (cm) 90, pot diameter (cm) 14, pot height (cm) 13, fringe (cm) 15. A different gauge or stock makes a different size; the counts do not change.

Brief

“I'd like a chunky four-arm hanger in charcoal grey 6 mm cotton rope with a wide-meshed net, finished with a short wrap in white cord above the tassel.”

Checks

The counts, part sizes and placement were checked by computation on 30 September 2026 (verified on attempt 1); the piece has not yet been made by hand. If yours comes out differently, tell us and we will look at it.

Design your own like this