Terracotta Spiral Plant Hanger
Terracotta Spiral Plant Hanger is a 90 cm macramé plant hanger for a 14 cm pot: 8 cords of cotton 3-ply rope, 5 mm cut at 5.5 m, 4 knotted arms and a 3-row net.
What was checked: cord lengths from the knot multipliers, the net spacing against the pot, the hanging length against the target.
- Finished length
- 90 cm from ring to tassel end
- Pot
- 14 cm across, 13 cm tall
- Cord
- Cotton 3-ply rope, 5 mm
- Cords
- 8 working cords, 16 strands
- Ring
- Metal ring, 5 cm (2 in)
- Total cord
- about 45.4 m (726 g)
The first rows are free to read below. Every library pattern and its PDF are included with any plan.
Cut list
| Piece | Count | Length |
|---|---|---|
| Working cord | 8 | 550 cm (5.5 m) |
| Wrapping cord (top wrap) | 1 | 70 cm |
Each working cord is folded in half through the ring, so 8 cords give 16 strands and 4 arms of 4 strands. Cut lengths use 4x the finished length for square knots, 3.5x for the spiral, 1x for gaps and the tassel, plus 5 cm per wrap and 10 cm for the fold and trim, rounded up to 10 cm.
1. Mount on the ring
2. Top wrap
3 cmEvery library pattern and its PDF are included with any plan. The first rows, the supplies and the notes are free to read.
| Category | Item | Amount |
|---|---|---|
| cord | Cotton 3-ply rope, 5 mm | 45.4 m |
| rings | Metal ring, 5 cm | 2 in |
Inputs
Sizes are computed from these fixed inputs: target length (cm) 90, pot diameter (cm) 14, pot height (cm) 13, fringe (cm) 15. A different gauge or stock makes a different size; the counts do not change.
Brief
“Please design a hanger with alternating square knot and spiral sections on each arm, in dusty terracotta-orange 5 mm cord, with a long fluffy tassel at the bottom.”
Checks
The counts, part sizes and placement were checked by computation on 30 September 2026 (verified on attempt 1); the piece has not yet been made by hand. If yours comes out differently, tell us and we will look at it.
